- Joined
- Aug 20, 2015
- Messages
- 1,346
- Reaction score
- 639
L6 Series Heavy Lifter Droid
Affiliation:
Independent
Manufacturer:
Standar Minning
Class:
Power Worker Doird
Locomotion:
LegsPower Supply:
64 hour powercell
5 week in powersaving mode
Sensors:
- Infrared Imaging Module
- Audio sensor
- Optical sensor
Size:
6'8
Composition:
Durasteel and plastoid alloys
Tools and Equipment:
- Holoprojector
- Integrated comlink
- Vocabulator
- Unused mounts/sockets for further upgrades
DESCRIPTION
The L6 line was a group of 99 droids created and purchased by the mining mogul Markus Standar for us on his illegal mining projects in the outer rim. Built for heavy labour and extreme environments, the L6 is a tough and ready machine, lacking in the finesse of its protocol cousins. The L6's are designed to lift up to four thousand pounds to its waist height and two thousand five hundred pounds if needing to be lifted above its chest line. They also have a heavily insulated core to allow for use in extreme heat and cold. Due to their heavily lift capacity the L6's powered motors and hydraulics run at a slower speed than standard droids. As such the machine is outrun by most other animals on foot. Due to the size of the machine, it has a large amount of internal space for customization, with L6-99 being a prime example of what can be done with the base model. Only ninety-nine of the L6 line were produced prior to Markus Standar's death.LEGALITY
LegalINTENT
This is written as a mechanical write up for the base model for L6-99 detailing more of the specifics of what the model can and cannot do.ADVANCED TECH
No
Last edited: