Mordred's Workshop

Mordred

SWRP Writer
Joined
Jul 23, 2015
Messages
109
Reaction score
8
Mordred's Workshop
Hello, everyone. I don't know if you know me or not, but I was hoping for you all to get a little taste of who I am, what's coming up for Mordred and his characters, what I'm up to, and if I have any commissions for developing technology for others. Here, in Mordred's workshop, you will see a wide variety of different things. You will see my characters, my technology, but, mostly, you will see tech submissions and non-character related things, as I may just place characters and other things in an alternative workshop. It's my hope that this workshop will be a base for my ideas to develop, for people to see my ideas and realize they can send a request for a piece of technology to me, and for me to begin to develop my skills.

Anyways, that's all for the introduction, so enjoy the droids, the computer chips, the ships, and the weapons if you want! Thank you all for reading.

Rules


  • Please don't post here. If you have constructive criticism, a request for me, and if you want to send me a commission for technology, all you have to do is send me a PM. Thank you for that.
To Do List
  1. Strategic Command/Control Center Specialized Subprocessor (SC/CCSS-OX) prototype embedded in the self-analysis chip for droids & connected people/suits/devices/ships.
  2. Vehicular Connectivity Chip (VCC-0X) prototype that allows Ascendant to link himself w/other systems to improve processing power, or have something (like a ship) act as an extension of his body, his sensors, and him in general, by allowing him to fully immerse himself in the capabilities of the ship/vehicle
  3. Paint layers that, among the things below, do not interfere with what lies below them
    1. Dampen sensor readings
    2. Reduces chance of EMPs & ions through by partially absorbing them, and then dispersing them to surrounding area
    3. Self-healing top coat that provides additional air tight sealing on droid hull, and protects against basic things (such as high temperatures, or low temperatures) for the other paint layers
  4. Updated Droideka capable of of acting as heavy reconnaissance units (Heavy Reconnaissance Droideka Units (HRDUs))
  5. Custom 360 degree multi-spectrum, fully sensory capable, Battlenet-connected, sensory array w/fully interactive HUD, adaptive, growing database of all things encountered, and various types of identification (chemical analysis, material analysis, enemy identification) w/interconnectivity with Companion A.I. so that a written format of data from the Companion A.I. can be seen
  6. Companion A.I.
  7. Demon-class "Shogun" War Droids (use demon samurai picture)
  8. "Ladybug" IN-SCT scout droids
  9. Advanced droid brain, that I may just keep here so I can update it continuously until I'm happy with what I have done
 
Last edited:

Mordred

SWRP Writer
Joined
Jul 23, 2015
Messages
109
Reaction score
8
Affiliation: Together the makers, Ascendant and Isaac, make up the small start-up A&I Technologies.

Ownership: Ascendant; If anyone else wants to make use of it, please PM me a request/post a request (Any kind of droid, and sometimes those that are synthetic or in need or a prosthesis, is capable of using the "Wraith" blades, as long as Ascendant & Isaac want to build it for them)

Intent: I created this to provide a replacement for Ascendant's wrist blades, and the grappling hooks that he has built into his arm. It's purpose is to be a personal weapon capable of injecting poisons, latching on to surfaces with its ridged spikes, and be used for very close ranged combat. I am making it for personal use, but, if Isaac wants to build it or Ascendant wants to do the same thing, it is possible for others to get a hold of the item for the price of 5,000 credits (it's this price due to the materials. If it is too high, or too low, please notify me). I don't plan to sell or market it on a massive scale, and unless there is big enough demand I probably won't have open sales. This is different from other similar technologies simply because it has multiple purposes, and can do more than the wrist blade or grappling hook alone.

Model: "Wraith" Combat Wrist Module (Model 00 - Prototype)

Type: Melee weapon/Ranged Grappling Hook Launcher

Size: It depends on the size of the wrist of the opponent, but the Wraith spikes themselves are capable of being as long as 12 inches.

Composition: A phrik and titanium alloy (80% Phrik, 10% titanium) for the blade, grappling hook, and the lines, easily replaceable lubricant for the mechanical parts, and a cheaper phrik-titanium alloy for everything else (60% phrik, 40% titanium); A higher end version, that costs 16,000 credits, and takes up less room due to the armor requirement being lowered, and has to be custom ordered, is comprised of 70% Phrik, 15% Duranium, 10% Titanium, and 5% beskar) is available. If you want to, you can custom order the Wraith Combat Wrist Module in any way that you want by swapping out lubricants, having it be comprised of synth-flesh and similar materials for synthetic beings or a prosthesis, and you can get a quote for the price as well. You can also custom order other things.

Range: The optimal range for the grappling hook is around 60 meters

Ammunition Capacity: There are 2 grappling hooks for each gauntlet, and they go forward and can be detached/refilled, but they are also retractable and can be pulled back to the wrist spikes

Description:

The need for lowering the amount of modules in the wrist area of the Ascendant droid's body became evident to Isaac when he noticed that the modules of Ascendant's arm area were running out of room, and a way needed to be devised to replace several modules in the arm. Thus, Isaac realized that he needed to create something that could replace Ascendant's wrist blades, the containers for his lightsabers, his grappling hook launchers, and several module areas while retaining a certain size factor. Isaac set about drafting up plans for the new A&I prototype that he would be implanting into his closest friend and comrade, Ascendant, in the hopes that he could forge something amazingly efficient for him. A&I Technologies had recently been founded by the duo, and their recent profits had allowed the Isaac to buy enough materials for testing in the construction of the prototype. It quickly became evident that "Wraith" was going to be something that would drastically increase the efficiency of Ascendant himself, even if it did have a few of its own flaws, and limitations, as a prototype.

The first materials that Isaac tested were several lesser alloys of Durasteel, but the weight of the Ascendant droid proved too much for the alloy that had been created, and a tweak to the composition on Isaac's special little tablet was required. So, he set to work with his stylus and worked on the model once more to improve the structural integrity of the prototype, and then ran the Durasteel comprised model through testing, but found that durasteel had to be abandoned in favor of something else. Ascendant, knowing his structural integrity and alloys well, recommended a custom alloy of phrik, duranium, titanium, and Beskar for his own personal module, while a phrik/titanium alloy had been recommended for back-up models due to the short supply of Beskar. Isaac, knowing to be cautious, used his tablet to make a variety of simulations, and ran them to find that both alloys performed in a way that was much better than the original Durasteel composition. While Durasteel was cheaper, it simply couldn't stand up to the punishment that Ascendant would be putting it through during his battles with the opponents he would be encountering over time, and so Isaac put the prototype together.

Development ended when a lubricant that reduced temperatures, the potential for sparking, and eliminated the chance for the device to compromise its own structural integrity was combined with nanocircuitry inside of the gadget that would connect to the upcoming self-analysis chip, and provide information on how well it was doing. The Wraith spike itself, however, proved to be far weaker than previously thought, and it could only penetrate medium armor unless the user wanted the wraith spike, and the sensors that provided information on what was injected to break. The rest of the device, on the other hand, proved to stand up well to punishment, and it was concluded that the wrath spike would simply have to do for stabbing thicker materials, and for slowing the descent of the user/allowing gripping of objects with its extremely jagged edges. In addition, the Wraith module would prove to be rather difficult to repair when damaged sufficiently compared to other modules, and thus it was made easy to simply replace the Wraith module with a "plug and play" mechanism by simply detaching the broken module, and attaching the new one. The two high end cords that the module could fire were outfitted with solid Beskar spikes that, once embedded in the object needing to be grappled, would deploy some hooks to give a good solid grip on it.

Overall, the Wraith spikes do their job plenty well.

Features:

  • 2 grappling hooks that, once inside the area being grappled, expand their hooks instead of being a spike within each gauntlet
  • Highly durable phrik and durasteel hooks & grappling lines, but a slightly less durable spikes
  • Is fitted to droid
  • Retractable spikes that can inject poisons, or be used as blades with their jagged edges to either kill or grab onto surfaces
  • Provides enough room for other things to be added to the wrist (as long as you're reasonable, and have the skill or have it custom ordered that way, anyways. IE: Ascendant can have this, and something else significant, because his arms are capable of splitting in two, and have been built in such a way that they are capable of housing more than the usual amount of equipment in them; this means he has extra room, not too much, but just enough room in the construction that he can add more. However, if he had half a dozen things in his wrist then it is unlikely that he would be capable of hosting them)
  • Certain modified versions sport special cut, hydraulically sealed areas where things can be placed if you want to give up some room to house whatever you're containing. Other variations of these hydraulically sealed containers allow them to be deployed easily, so if you have a lightsaber, for instance, then it is probably going to be nice to just be able to get it into your palm.
 
Last edited:

Mordred

SWRP Writer
Joined
Jul 23, 2015
Messages
109
Reaction score
8
jtaQMuf.jpg

Affiliation:
Created by A&I Technologies

Ownership: Personal sabers of Ascendant

Intent: I created these as the personal lightsabers of the Ascendant droid. It's purpose is to be the weapon of the object, and it is for personal use. I am making it simply because I had to write up the lightsabers themselves. I don't intend to sell or market it. It is different from other lightsabers because these are his personal sabers, and they have a few unique features.

Model: The Ascendant Blades

Type: Smart Lightsabers

Size: The lightsaber handle is long-handled, and is nearly twice as long as your usual lightsaber blade to provide drastically increased leverage and more surface area

Composition: Proper saber materials, electrum detailing, impervium-phrik alloy (40% Impervium, 60% Phrik), Hurrikaine & Lorrdian crystals

Description:

Ascendant has had many wants and needs since he had been constructed by Isaac on the fateful day that would see one of, if not the, most advanced droids in the known Galaxy built in the workshop of a boy that, while blind, had tools that allowed him to "see" his creations, and interact with his tools properly. He couldn't do much outside of that for sight, however, but he saw that Ascendant desperately wanted the lightsabers that the Jedi and Sith he had encountered sported. Isaac knew his way around lightsabers due to Ascendant having brought home several, and had some materials from the lightsabers left over that would allow the construction of four, very special lightsabers for the Ascendant droid. However, Isaac wanted these lightsabers to be different from the standard ones that you would encounter in the hands of a force sensitive, and so he realized that making him as advanced as their wielder would be was the best thing that he could do. Thus, the Ascendant Blades were born in a recently upgraded workshop in an area where Isaac had created several of the parts of Ascendant himself, and they were fully integrated into the droid's self to make them truly a part of Ascendant.

The four blades constructed out of a ridiculously durable Impervium-Phrik alloy saw them being capable of resisting even the most devastating of damage being dealt to them during the missions that Ascendant would take them on. Each of the four blades were capable of interlocking with each other, and, while this often led to a Saberstaff, they could be placed together to form a four blades weapon that, with the gadgets Ascendant had, could easily devastate opponents. The Hurrikaine and Lorrdian crystals that Isaac made use of were focused through a force imbued crystal that changes the blade color to a gorgeous, humming, and vicious yellow. The Hurrikaine crystals, while dampened by the addition of the focusing crystal and the Lorrdian ones, allowed the blades greatly have increased penetrative capabilities when compared to what they would be like without them. Meanwhile, the Lorrdian crystals allowed the lightsaber to gift Ascendant's advanced droid mind greatly increased defensive capabilities when you thought about the fact that they granted a kind of intuition compared to other crystals.

The Blades of Ascendant were constructed with being capable of being used in multiple situations of all types, and thus they were designed with modularity and the capacity for things such as a Guard Shoto/Lightsaber Tonfa being added to it for when the situation called for it. The Blades are far from being as modular as Ascendant himself, but they have various parts in a case on Ascendant's ship that allow parts of all kinds to be added or swapped out. Prior to a mission Ascendant needs to take everything into account, and, aside from the various features that they have, this gave the capacity for the weapons to be made into something somewhat better. Not being limited to just adding Lightsaber Tonfa comprised completely of Phrik for enhanced defensive capabilities means that the blades can be curved slightly to provide their advantages by curving them with a press of a button (only one can be used at a time, however), or having a hand guard added to it for increased defensive capabilities, depending on the situation. These attributes, combined with the features described in the paragraph below, make the Blades highly functional and capable weapons that, if able to have their security features bypassed, would make a great addition to anyone who was terrifying enough to take Ascendant out.

The Blades possess Multi-phase capabilities that allow for the blade to be switched between three different blade lengths to greatly increase the capabilities of the blade, and for them to be able to be used in a greater array of situations. While most lightsabers deactivate when coming into contact with water, bifuricating cyclial-ignition pulse prevents the blade from shorting out when it comes into contact with water, and greatly improves situational superiority so that Ascendant may make good use of his aquatic capacities. A locator chip embedded deep within the hilt provides situational awareness in a such a way so that Ascendant may know wherever his lightsabers may be, so he may reacquire them without losing track of them across the advances of space. The Blades have been connected to Ascendant's own self-analysis chip to further provide further situational awareness capabilities when it comes to knowing what is going on with the Blades through the provision of unprecedented details on the Blades, and their functionality. Biometrics and identifiers that only allow Isaac and Ascendant to use the Blades, unless bypassed, magnetized hilts that greatly increase the grip on the blades and can be turned on and off with a mere thought by Ascendant for fluid combat, and nanocircuitry throughout the blades greatly increase multi-condition functionality.

The blades are, aesthetically, actually quite pleasing, and feature Electrum detailing, a gorgeous paint job, and the ability to see through a clear window at the center of the hilt and get a look into the inner workings in a way that is pleasing to the eyes. Isaac called on the aid of a friend when designing the weapon physically, and made use of the friend's skills in design to make them pretty enough for his closest companion to use them in a way that brought a smile to Isaac's face. Aesthetics were a big thing when developing the lightsabers, and the protective, self-healing paints may not be capable of repairing anything functional in the sabers, but they certainly keep them pretty. Let's just hope that the functionality of the sabers can continue alongside their pleasing aesthetics despise no protection, as of yet, against EMPs or ionic weaponry. When exposed to EMPs or ionic weaponry, the aesthetics may not be harmed, but, the Blades are reduced to the average lightsabers that you would encounter all across the galactic scene, and would likely require some repairs.

Features:

  • Four interlocking hilts - Can interlock into a four bladed weapon
  • Electrum detailing
  • Extremely durable
  • Nanocircuitry throughout the Blades maintain the various aspects of the weapons
  • Connected to Ascendant to provide functionality capabilities/all important information ranging from thermals, to structural integrity, to the functionality of the systems
  • Hurrikaine & Lorrdian crystals, with a focusing crystal that makes them yellow, the Hurrikaine crystals make them capable of penetrating nearly anything, while the Lorrdian crystals provide Ascendant with slightly enhanced defensive capabilities
  • Locator that connects to Ascendant, and allows him to know where they are at all times
  • Magnetized to stay connected to Ascendant in a way superior to that of just gripping them, with the magnets being capable of being turned on and off with a mere thought by Ascendant
  • Multi-phase capabilities (so it can extend from a 3 foot, to 5 foot, and up to 7 foot long blade)
  • Biometrics & identifiers that prevent anyone except Isaac and Ascendant from using them
  • Capable of functioning underwater (this was added due to the fact that Ascendant can maneuver well underwater)
  • Not yet protected against EMPs or ionic weaponry, which can cause the more advanced features (like tracking, or biometrics) to be turned offline and have the lightsabers reduced to your average lightsabers
 
Last edited:

Mordred

SWRP Writer
Joined
Jul 23, 2015
Messages
109
Reaction score
8
Affiliation: Designed by A&I Technologies; if you want to manufacture it, use it faction-wide, or aid in developing it, and are a corporation or faction, please send a PM and we'll add you here

Ownership:
Ascendant; If you want to use it either personally, for your creations, or in a large amounts, please send a PM and we'll add you here

Intent: I created this to provide the first model of the chip so that it could be used personally, and at large, by all people. I am making it because I intend to sell, and market it, and develop it further. I don't believe that there is any technology that is very similar to this. It is different from other technology because of the fact it can be interconnected with other chips.

Cost: 2,400 credits for chip & nanocircuitry to make chip work fully, 1,000 credits for medical sensor add-on
Model/Name: Self-Analysis Chip, MK. I (SAC-01)
Type: Specialized Electronics Chip
Power Supply: Powered by device it is in with LEAP-TECH (Low Energy Auxiliary Power-Technology)

Sensors: Capable of gathering, and storing, any kind of knowledge and data regarding the device that it has been placed in, ranging from thermal, to the percentage of functionality, to structural integrity

Size: 0.3nm

Composition: An alloy designed to greatly increase processing power

Description:

The Self-Analysis Chip, MK. I, also known as SAC-01, is an extremely advanced form of computer chip made to function in multiple forms of electronics known as a Specialized Electronics Chip (or SEC), that has the most notable feature of providing a completely interactive, fully in-depth diagnostics system. The Self-Analysis Chip was designed by A&I Technologies to function in everything from weapons, to ships, to droids, to industrial devices, to a variety of other things in both professional and commercial uses to drastically improve the knowledge that was being relayed to the users'. The SAC-01 chip was designed by Isaac primarily so that Ascendant could maintain strategic superiority over his opponents with a constant feed of information on himself, and all of the independent parts that make him up, but SAC has been noted to be able to be modified to support different situations, such as those for monitoring organics in squadron, or for industrial purposes.

The SAC chip is powered by LEAP-TECH, which allows the electronic it is placed in to power the chip for an amount of power so minor that it has so noticeable effect on the device that is making use of it. It sends the details wanted to the HUD of the user, or to the control panel/a screen connected to the electronic that the chip has been placed inside to monitor. It is also capable of creating its own network of chips, and can provide an easily navigable interface so that you can locate the information you need from each chip with ease, and can also connect to a versatile array of other chips and hardware to form a multi-functional network. These features were created to cater to the HUD that Ascendant sees constantly, and to let him easily receive notifications on the droids that he possesses.

Overall, they are one of the most effective diagnostic chips due to their connectivity and the variety of sensory capabilities that it has. Enjoy the logistics!

Features:

  • Sends the details in interactive form to HUD, or the control panel/a screen
  • Powered by LEAP-TECH (Low Energy Auxiliary Power - Technology)
  • Capable of being used in nearly anything electronic
  • Creates its own network of chips, and is capable of being connected to a wide variety of other chips and hardware to form a multi-functional network
  • Can provide thermal information
  • Can provide functionality details of every individual system in percentages
  • Can provide details on structural integrity
  • Can be used to log errors, crash logs, and store information about device on chip
  • Can provide notifications when a system fails, or warnings when pushing a system past its limits, and notifications when ammo is running low, when a reload is required, and a variety of other notifications
  • Can provide locations
  • Capable of running a diagnostic on all systems & capabilities of the device it is placed in
  • Can be used to provide enhanced strategic capabilities when combined with the medical add-on for organic teams, and with the Strategic Command/Control Center chip for when commanding/controlling armed forces, or working tools
 

Mordred

SWRP Writer
Joined
Jul 23, 2015
Messages
109
Reaction score
8
Affiliation: Designed by A&I Technologies; if you want to manufacture it, use it faction-wide, or aid in developing it, and are a corporation or faction, please send a PM and we'll add you here

Ownership:
Ascendant; If you want to use it either personally, for your creations, or in a large amounts, please send a PM and we'll add you here

Intent: I created this to provide the personal guards/knights of Ascendant, and to provide an interesting droid for the market. I do intend to sell and market it, both, and enjoy it while doing so.

Model/Name: (What is your droid's name or designation? An example: B1 Battle Droid)
Cost: 300,000 Credits
Class: Battle Droid

Locomotion: Bipedial servomotors with advanced dexterity, and the allowance of actions that would simply break organic creatures, and the ability to that allow it to run at speeds approaching 80 miles per hour
Power Supply: Hybrid power cells that allow the droid to be active for 5 days in non-stop combat
Sensors: Advanced military-grade sensors across the board that provides organic-like sensory capabilities, threat detection systems, while also giving the advantages of trajectory prediction, 360 degree vision, and audio sensory capabilities up to a mile away

Size: 7 feet tall, 620 pounds

Composition: Duranium plating, titanium skeleton, with Phrik on the joints

Weapons: Beskar katana with blades that heat to the point that they are as hot as plasma, Hiraku Heavy Blasters built into both wrist, with this Mass Accelerator Carbines firing 20mm HEAT-DP rounds while also being placed into the right shoulder as a deployable turret, wrist blades, two grappling hooks, flame thrower attached to right arm, deployable grenade launching turret in left shoulder

Tools: Deployable data probes

Description:

Development

Armor

Armament

Tools

Physical Capabilities

Features: (If the description gives you trouble, you can fill out a list of features instead and omit the description. If you filled out the description, omit this part of the template.)
 
Top