NCMG-44 Enhanced Pistol

[The Ghost]

Weapon Image- The Law Giver from the Karl Urban Judge Dredd movie.




Affiliation- Independent

Ownership- N/A

Intent- To create a modified blaster that can offer suppression fire and increase the offensive capabilities of the user.

Model Number- NCMG-44

Type- Repeater Blaster Pistol

Size- Larger pistol, based on the T-6 heavy blaster pistol.

Composition- Durasteel and electronic components.

Range- 50 Meters

Ammunition Capacity- 20 Shots before needing to be reloaded.

Description- A simple modified version of an existing blaster pistol. The power of the weapon is toned down to prevent the barrel from warping due to the lengths of heat coming from the continuous stream of automatic fire. The internal composition of the weapon is altered, forcing a loss of power in exchange for an increase in rate of fire. This decreases the accuracy of the weapon a bit, unless the user is trained on the weapon and has the strength to handle the increased recoil from the constant firing. All in all, it's just a simple tweak to the weapon. Adjusting and decreasing the power of a heavy blaster pistol while increasing the rate of fire. The reason a heavy blaster pistol was chosen for the design is because a heavy blaster barrel is already created to withstand the lengths of power the weapon can produce and discharge. With the yield decreased, the barrel can still handle the amount of heat given off by the continuous fire.



Edit Description- Augmented from a basic T6 Heavy Blaster Pistol, very little outside of the casing is changed. The internal components are still all the same, but the difference is that the weapon has the yield decreased by thirty percent. This is to allow for the automatic fire rate without the barrel of the weapon warping from the excess of heat from said rate of fire. Though with the decrease in power cones a decrease in recoil, but also accuracy. The decrease in accuracy comes from the increased rate of fire.

With the continuous rate of fire, the recoil effects accuracy unless someone is Strong enough to withstand the kickback and make good use of it. The rate of fire is 300 three hundred rounds per minute, equalling out to be five rounds per second.

 

[TheSilentWind]

You need to have your faction approved before you make tech for them. It doesn't really limit you from making submitions. All you have to do is change the Affiliation to Independent, or you can just leave the Order of Zenkai there and add Independent.

 

[The Ghost]

Considering I've met all stipulations for faction approval, I'm simply waiting on the admin to go ahead and put it through. But as I said before, thank you for the input.

 

[TheSilentWind]

Considering I've met all stipulations for faction approval, I'm simply waiting on the admin to go ahead and put it through. But as I said before, thank you for the input.

While you may have done that, your faction isn't approved yet, so you would still need to follow the guidelines of those factions that haven't been approved yet. Its really not that difficult. Besides, I have seen multiple people be told the same thing, and I was one of them.

 

[Commissar Brett]

Why don't you find an image of something close to what you're going for?

 

[The Ghost]

Well the fact about that is, you designed things for a faction that didn't meet the stipulations presented. You got a little overzealous. I can see why they told you to change it. On the other hand, with me, I'm simply waiting for the admin to put it through. Changing the affiliation of the deal I at this point wouldn't make a world of sense since things could move along today and be put through. Then what would have been the point of changing the affiliation? On top of that, you're not an admin. Unless or until one of them says something, it'd be appreciated if you mind your business.


And Brett, I generally don't add images because I leave that to the imagination of people. You might see it having a different casing than someone else. Like the different varieties of the 9mm pistol out there.

 

[TheSilentWind]

Well the fact about that is, you designed things for a faction that didn't meet the stipulations presented. You got a little overzealous. I can see why they told you to change it. On the other hand, with me, I'm simply waiting for the admin to put it through. Changing the affiliation of the deal I at this point wouldn't make a world of sense since things could move along today and be put through. Then what would have been the point of changing the affiliation? On top of that, you're not an admin. Unless or until one of them says something, it'd be appreciated if you mind your business.


And Brett, I generally don't add images because I leave that to the imagination of people. You might see it having a different casing than someone else. Like the different varieties of the 9mm pistol out there.

Yes, I am not an admin, but so are the majority of people in this site, and what I am doing is trying to help you, something that you seem to respond to with hostility. In addition to that, in terms of the tech profiles I created back then, I was unaware of the fact that you needed to have your faction approved, since it was the first time that I had put a lot of effort into an Indie faction, and it had gathered a reasonable amount of interest. Furthermore, I was still a new member, and I am grateful to people that had told me back then that I needed to have my faction approved.

What I am trying to do here is to help you, not to boss you around, or to attempt to force you to do it. I am just doing what I had been told to do by multiple people, and Jiang who at that time was an admin.

Unless Lavi approves the faction, it hasn't been approved yet, regardless of the fact that you got three members. Besides, you are allowed to edit the profile, and when your faction is approved, you can simply change the affliation of your weapon.

Anyway, I am out. My intent wasn't to create something big. If Green Ranger is fine with this, then thats cool, but I am not wasting my time and turning this into an OOC Battle.

 

[Commissar Brett]

Yes, I am not an admin, but so are the majority of people in this site, and what I am doing is trying to help you, something that you seem to respond to with hostility. In addition to that, in terms of the tech profiles I created back then, I was unaware of the fact that you needed to have your faction approved, since it was the first time that I had put a lot of effort into an Indie faction, and it had gathered a reasonable amount of interest. Furthermore, I was still a new member, and I am grateful to people that had told me back then that I needed to have my faction approved.

What I am trying to do here is to help you, not to boss you around, or to attempt to force you to do it. I am just doing what I had been told to do by multiple people, and Jiang who at that time was an admin.

Unless Lavi approves the faction, it hasn't been approved yet, regardless of the fact that you got three members. Besides, you are allowed to edit the profile, and when your faction is approved, you can simply change the affliation of your weapon.

Anyway, I am out. If Green Ranger is fine with this, then thats cool, but I am not wasting my time and turning this into an OOC Battle.

LISTEN TO HIM HE ARE MAKING SENSE! No really, I get why you're doing these things, but simply say it's Indie

 

[The Ghost]

Well, the fact of the matter is, I didn't ask for his help. If I wanted help I would have asked for it. Me telling him to mind his own business wasn't being hostile. It was just me telling him to mind his own business, because I didn't ask for his help. As I've said, it doesn't make sense to change it. If and admin did say something, I'd simply point to the waiting approval. Which puts the wheels in motion to have things corrected, which negates the point of changing it. Which is really just a formality, which is what he wanted argue over. So all in all he wanted to bicker about something trivial.

 

[Silverface]

Seems to be an incredibly generic blaster pistol. Don't see why this couldn't be swapped with any canon design, such as a DL-44 or DE-10, or a T-6 Thunderer which this pistol is apparently based off of. This would be better served as mentioning in your character profile "Character owns a modified T-6 Thunderer with a lower power setting" than a seperate technology profile.

The description is also incredibly vague. Pistols are semi automatic, so what would an increase in rate of fire achieve when you can fire it as fast as you can pull the trigger? Since you've not stated that this is a repeater pistol, one has to assume that it's still like it's base model, in that it's a single shot "Fire as fast as you can pull the trigger" affair.

This weapon really needs to be more unique to warrant a technology profile.

 

[Loco]

On top of what Silver said being generic (which is a problem with most pistols posted here), you need to chill out bro. You do not get to submit tech just to tell people to mind their own business when they give you entirely legitimate feedback. Silentwind was correct, and you are not- you're just being difficult for the sake of being difficult, and that's not a good way to introduce yourself to all of us. The tech forum is feedback based, and most people are more than willing to be helpful, and they more often than not have some idea what they're talking about. You don't have to take everyone's advice, but you shouldn't dismiss everything they say out of hand.

 

[Commissar Brett]

What you're doing right now is an extremely good way of making enemies very quickly. You wanna have fun on the forum? The first step is to be generally likeable. Novel-bloody-concept.

 

[Silverface]

Both of you, enough dogpiling. Keep it related to the tech and the tech only.

 

[The Ghost]

Granted it is generic, but as the expression goes, better safe than sorry. I was on a forum that was pretty much a duplicate of this one and used the same weapon, and someone complained about it. So I figured it better to cover my bases. On top of that, I've never seen it mentioned that pistols are semi auto. It's always been a standard rate of fire. And I feel it's not so much vague as it is simplistic. Really it's just augmenting the electronic components to tune down the yield output while raising the rate of fire. That point was explained as a point to ensure warping to the barrel from the continuous heat it's subjected to. If the output is toned down, but the rate of fire increased, then it pans out to be about the same, as far as stress for the barrel.

 

[Silverface]

The thing is, generic weaponry are just that, generic. What you're trying to do is such a minute difference between Blaster A and Blaster B that it's not going to come into effect in roleplay. You can fire your twenty shots a little bit faster, with a little bit less damage, than Random Hutt Mook #24658A. But at the end of the day, by your own admission, the weapon pans out the same with it's competitors.


And Star Wars blaster pistols are single shot. Unless you specifically make a repeater pistol, which would operate like an automatic; in that you hold the trigger down until your power cell is empty.


This pistol's customisations are really better served by having it in your character profile if you feel it adds anything. That said, you could turn this into an all out repeater pistol, which I believe nobody has actually made IIRC, and it'd warrant having a tech profile because of how unusual it is.

 

[Commissar Brett]

You could ramp the power to make it more devastating, but that could have an effect on the heat dissipation. How does it deal with excess heat? Does it just let it cool off, or do you use something like an expendable heat sink?

 

[The Ghost]

Well essentially, that's what it is. A repeater pistol made from a modified T6.

 

[The Ghost]

Well essentially, that's what it is. A repeater pistol made from a modified T6. It's just tweaked a little bit. A fully automatic T6 would be a different story though. That I'd be a bit more specific about, because there'd be a lack of accuracy due to the recoil.

 

[Silverface]

Recoil isn't really a huge issue. And if this is a repeater, please specify that it is in the profile, it really helps clear up confusion.

 

[The Ghost]

I'm pretty sure I did specify that in there, but recoil is always an issue. I don't know if you've ever fired a gun before, but with automatic weapons the recoil is what takes the accuracy down. Even with something like an Uzi, if you can't handle the recoil then you'll not going to hit your target that much, if at all.